electronics module VMPA2-FB-EMS-D2-4 Diagnosis=(* Condition Monitoring, * Wire break per valve coil, * Short circuit of valves, * Undervoltage, valves), Max. number of valve positions=2, Max. number of solenoid coils=4, Intrinsic current consumption at load voltage=3 mA, Intrinsic current consumption at operating voltage=8 mA

regulator plate VMPA2-B8-R2C2-C-10 Width=21 mm, Assembly position=Any, Pneumatic vertical stacking=Pressure regulator for 2, Controller function=(* Output pressure constant, * with secondary exhaust), Pressure gauge selection=possible

multi-pin node VABE-S6-1LF-C-M1-R19 For valve terminals VTSA and VTSA-F. Assembly position=Any, Max. number of valve positions=(* 16 with monostable valves, * 8 with bistable valves), Nominal operating voltage DC=24 V, Permissible voltage fluctuation=+/- 10 %, Corrosion resistance classification CRC=0 - No corrosion stress

coupling EAMC-30-32-6.35-8 Holder diameter 1=6,35 mm, Holder diameter 2=8 mm, Size=30, Nominal length=32 mm, Assembly position=Any

coupling EAMC-30-32-8-8 Holder diameter 1=8 mm, Holder diameter 2=8 mm, Size=30, Nominal length=32 mm, Assembly position=Any

manifold block CPE14-PRS-3/8-5 For CPE valves. Grid dimension=20 mm, Assembly position=Any, Max. number of valve positions=5, Max. no. of pressure zones=2, Operating pressure=-0,9 - 10 bar

manifold block CPE18-PRS-3/8-3 For CPE valves. Grid dimension=26 mm, Assembly position=Any, Max. number of valve positions=3, Max. no. of pressure zones=2, Operating pressure=-0,9 - 10 bar

proximity sensor SME-8M-DS-24V-K-0,3-M8D Electric, with reed contact, for drives with T-slot, assembly from above, with M8 plug. Authorisation=(* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity)=to EU directive for EMC, Special characteristics=Oil resistant, Materials note=(* Free of copper and PTFE, * Conforms to RoHS), Measuring principle=Reed magnetic

proximity sensor SME-8M-DS-24V-K-7,5-OE Electric, with reed contact, for drives with T-slot, assembly from above, with cable. Authorisation=(* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity)=to EU directive for EMC, Special characteristics=Oil resistant, Materials note=(* Free of copper and PTFE, * Conforms to RoHS), Measuring principle=Reed magnetic

mini slide DGSL-4-30-P1A For position sensing, with highly accurate, durable ball-cage guide and very high repetition accuracy, flexible damping on both sides with metallic end position (P1). Stroke=30 mm, Adjustable endposition range/front length=25,5 mm, Adjustable endposition range/rear length=13,5 mm, Piston diameter=6 mm, Operating mode of drive unit=Yoke

SN65LVDS3487DG4

Texas Instruments

Distributor

Distributor

SKU

Stock

Price Range

Digi-Key Electronics