The HMC1105 is a passive miniature frequency doubler MMIC. Suppression of undesired fundamental and higher order harmonics is up to 46 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, requires no DC bias, and adds no measurable additive phase noise onto the multiplied signal.
Applications

    Point-to-Point and VSAT Radios 
    V-Band Communications 
    Test Instrumentation
    Radar
    Space

Signal Conditioning Passive SMT Freq. Doubler  0.7 - 2.4 GHz

RF IC Doubler HiperLAN, UNII 850MHz ~ 2GHz  8-MSOP

Signal Conditioning Passive  Freq. Doubler, 0.85 - 2.0 GHz

RF IC Frequency Doubler VSAT 1.25GHz ~ 3GHz  8-MSOP

Passive RF Multipliers x2 4GHz to 8GHz-OUT 8-Pin MSOP T/R

The HMC205 is a passive miniature frequency doubler in a MMIC die. Suppression of undesired fundamental and higher order harmonics is 32 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, no DC bias, and no measurable additive phase noise onto the multiplied signal.
Applications

    Wireless Local Loop
    LMDS, VSAT, and Point-to-Point Radios
    Test Equipment

Digi-Key Electronics

Mouser Electronics

Analog Devices

Verical

Arrow Americas


		DS301 and DSP402 supported
		Profile position and velocity modes
		Several homing modes
		Objects for Q programming
		Objects for data registers
		7 digital inputs, 3 digital outputs, all optically isolated
		RS-232 cable and all mating connectors are included
	


		744 lines of stored program capability
		Math calculations using analog and digital parameters
		7 digital inputs, 3 digital outputs, all optically isolated
		2 analog inputs, +/-10 volt range
		Stall prevention/detection with encoder feedback
		Advanced anti-resonance algorithm
		Torque ripple smoothing
		Microstepping to 51,200 steps/rev
		Idle current reduction
		32 axis multi-drop capability
		RS-232 cable and all mating connectors are included
		Compatible with many 3rd party HMIs
		Capable of all “S” drive control modes
	


		744 lines of stored program capability
		Math calculations using analog and digital parameters
		15 digital inputs, 7 digital outputs, all optically isolated
		2 analog inputs, +/-10 volt range
		Stall prevention/detection with encoder feedback
		Advanced anti-resonance algorithm
		Torque ripple smoothing
		Microstepping to 51,200 steps/rev
		Idle current reduction
		32 axis multi-drop capability
		RS-232 cable and all mating connectors are included
		Compatible with many 3rd party HMIs
		Capable of all “S” drive control modes
	


		100 lines of icon based program capability
		Si is heralded for its programming ease
		Animation mode displays operation in real time, great for debugging
		15 digital inputs, 7 digital outputs, all optically isolated
		Optional MMI-01 for menu selection, flow control and inputting parameters
		Capable of all  “Q” and “S” drive control modes
		RS-232 cable and all mating connectors are included
	


		Ultra compact size
		Current range 0.3 to 2.2 A/phase, peak of sine
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Idle current reduction
		Selectable digital input filter
	


		Great for OEM applications requiring basic step & direction control of a 2-phase step motor
		Step & direction or CW/CCW pulse control
		High performance
		Anti-resonance
		Microstepping
		Microstep emulation
		Simple setup
		Matched step motors Designed for OEMs
	


		Current range 1.12 to 4.5 A/phase, peak of sine
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Idle current reduction
		Selectable digital input filter
	


		Current range 2.35 to 8.0 A/phase, peak of sine
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Idle current reduction
		Selectable digital input filter
	


		Operates from 90 VAC to 240 VAC
		Provides motor current up to 2.5 A/phase (peak of sine) with idle current reduction
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Selectable digital input filter
	

SN65HVD1781P

Texas Instruments

Distributor

Distributor

SKU

Stock

Price Range

Digi-Key Electronics

296-24455-5-ND

397

1

$7.32

10

$5.66

50

$4.99

100

$4.78

250

$4.56

500

$4.43

1000

$4.32

Copyright © 2021 WTWH Media LLC and its licensors. All rights reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy

SN65HVD1781P

Texas Instruments

Distributor

Distributor

SKU

Stock

Price Range

Digi-Key Electronics

296-24455-5-ND

397

1

$7.32

10

$5.66

50

$4.99

100

$4.78

250

$4.56

500

$4.43

1000

$4.32

Copyright © 2021 WTWH Media LLC and its licensors. All rights reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.Privacy Policy

Copyright © 2021 WTWH Media LLC and its licensors. All rights reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy