electronics module VMPA2-FB-EMS-D2-4 Diagnosis=(* Condition Monitoring, * Wire break per valve coil, * Short circuit of valves, * Undervoltage, valves), Max. number of valve positions=2, Max. number of solenoid coils=4, Intrinsic current consumption at load voltage=3 mA, Intrinsic current consumption at operating voltage=8 mA

regulator plate VMPA2-B8-R2C2-C-10 Width=21 mm, Assembly position=Any, Pneumatic vertical stacking=Pressure regulator for 2, Controller function=(* Output pressure constant, * with secondary exhaust), Pressure gauge selection=possible

multi-pin node VABE-S6-1LF-C-M1-R19 For valve terminals VTSA and VTSA-F. Assembly position=Any, Max. number of valve positions=(* 16 with monostable valves, * 8 with bistable valves), Nominal operating voltage DC=24 V, Permissible voltage fluctuation=+/- 10 %, Corrosion resistance classification CRC=0 - No corrosion stress

coupling EAMC-30-32-6.35-8 Holder diameter 1=6,35 mm, Holder diameter 2=8 mm, Size=30, Nominal length=32 mm, Assembly position=Any

coupling EAMC-30-32-8-8 Holder diameter 1=8 mm, Holder diameter 2=8 mm, Size=30, Nominal length=32 mm, Assembly position=Any

manifold block CPE14-PRS-3/8-5 For CPE valves. Grid dimension=20 mm, Assembly position=Any, Max. number of valve positions=5, Max. no. of pressure zones=2, Operating pressure=-0,9 - 10 bar

manifold block CPE18-PRS-3/8-3 For CPE valves. Grid dimension=26 mm, Assembly position=Any, Max. number of valve positions=3, Max. no. of pressure zones=2, Operating pressure=-0,9 - 10 bar

proximity sensor SME-8M-DS-24V-K-0,3-M8D Electric, with reed contact, for drives with T-slot, assembly from above, with M8 plug. Authorisation=(* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity)=to EU directive for EMC, Special characteristics=Oil resistant, Materials note=(* Free of copper and PTFE, * Conforms to RoHS), Measuring principle=Reed magnetic

proximity sensor SME-8M-DS-24V-K-7,5-OE Electric, with reed contact, for drives with T-slot, assembly from above, with cable. Authorisation=(* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity)=to EU directive for EMC, Special characteristics=Oil resistant, Materials note=(* Free of copper and PTFE, * Conforms to RoHS), Measuring principle=Reed magnetic

mini slide DGSL-4-30-P1A For position sensing, with highly accurate, durable ball-cage guide and very high repetition accuracy, flexible damping on both sides with metallic end position (P1). Stroke=30 mm, Adjustable endposition range/front length=25,5 mm, Adjustable endposition range/rear length=13,5 mm, Piston diameter=6 mm, Operating mode of drive unit=Yoke

Gecko DIL Male Vertical Surface Mount Connector, no latches, gold, pick & place (cut tape packing), 17+17 contacts

2.00mm (0.079") Pitch DIL Vertical 3.5mm Throughboard Pin Header, 3.5mm mating pin height, gold, 20+20 contacts

2.00mm (0.079") Pitch DIL Vertical SMT Socket Assembly, selective gold + tin, 3+3 contacts

2.00mm (0.079") Pitch SIL Horizontal SMT Socket Assembly, selective gold + tin, 3 contacts (Tape & Reel packing)

2.00mm (0.079") Pitch DIL Vertical 2.6mm Throughboard Socket Assembly, selective gold + tin, 3+3 contacts

Archer Kontrol (1.27mm pitch) DIL Vertical Socket SMT high performance connector, 13.65mm connector height, in Tape and Reel - 80 contacts (40+40)

Datamate J-Tek DIL Male Vertical 3mm Throughboard Connector, selective gold + tin/lead, with jackscrews + board mount, 10+10 contacts

Datamate L-Tek DIL Male Vertical SMT Connector, latched, selective gold + tin, 2+2 contacts, pick & place cap

Datamate L-Tek DIL Male Vertical SMT Connector, latched, selective gold + tin, 3+3 contacts, pick & place cap

Datamate L-Tek DIL Male Vertical 3mm Throughboard Connector, unlatched, selective gold + tin/lead, 10+10 contacts

DRUCKTRANSMITTER, WALTER PNEUMATIC VALVES (ISO)

Allied Electronics

Festo

Digi-Key Electronics

Farnell

Harwin Plc

Element14

Newark

Mouser Electronics

NAC Semi

FFC & FPC Connectors Zero Insertion Force Connector for FFC, 0.50 mm (.0197) Pitch

AVNET

Sager Electronics


		DS301 and DSP402 supported
		Profile position and velocity modes
		Several homing modes
		Objects for Q programming
		Objects for data registers
		7 digital inputs, 3 digital outputs, all optically isolated
		RS-232 cable and all mating connectors are included
	


		744 lines of stored program capability
		Math calculations using analog and digital parameters
		7 digital inputs, 3 digital outputs, all optically isolated
		2 analog inputs, +/-10 volt range
		Stall prevention/detection with encoder feedback
		Advanced anti-resonance algorithm
		Torque ripple smoothing
		Microstepping to 51,200 steps/rev
		Idle current reduction
		32 axis multi-drop capability
		RS-232 cable and all mating connectors are included
		Compatible with many 3rd party HMIs
		Capable of all “S” drive control modes
	


		744 lines of stored program capability
		Math calculations using analog and digital parameters
		15 digital inputs, 7 digital outputs, all optically isolated
		2 analog inputs, +/-10 volt range
		Stall prevention/detection with encoder feedback
		Advanced anti-resonance algorithm
		Torque ripple smoothing
		Microstepping to 51,200 steps/rev
		Idle current reduction
		32 axis multi-drop capability
		RS-232 cable and all mating connectors are included
		Compatible with many 3rd party HMIs
		Capable of all “S” drive control modes
	


		100 lines of icon based program capability
		Si is heralded for its programming ease
		Animation mode displays operation in real time, great for debugging
		15 digital inputs, 7 digital outputs, all optically isolated
		Optional MMI-01 for menu selection, flow control and inputting parameters
		Capable of all  “Q” and “S” drive control modes
		RS-232 cable and all mating connectors are included
	


		Ultra compact size
		Current range 0.3 to 2.2 A/phase, peak of sine
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Idle current reduction
		Selectable digital input filter
	


		Great for OEM applications requiring basic step & direction control of a 2-phase step motor
		Step & direction or CW/CCW pulse control
		High performance
		Anti-resonance
		Microstepping
		Microstep emulation
		Simple setup
		Matched step motors Designed for OEMs
	


		Current range 1.12 to 4.5 A/phase, peak of sine
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Idle current reduction
		Selectable digital input filter
	


		Current range 2.35 to 8.0 A/phase, peak of sine
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Idle current reduction
		Selectable digital input filter
	


		Operates from 90 VAC to 240 VAC
		Provides motor current up to 2.5 A/phase (peak of sine) with idle current reduction
		Electronic damping (anti-resonance)
		Microstepping & microstep emulation
		Built-in self test move profile
		Step & direction inputs
		CW Pulse/CCW pulse operation
		Selectable digital input filter
	

ZF5S-05-03-T-WT

Samtec

Distributor

Distributor

SKU

Stock

Price Range

AVNET

ZF5S-05-03-T-WT

None

1

$1.99

50

$1.62

100

$1.37

500

$1.22

Sager Electronics

000000000003543356

0

1

$1.99

50

$1.62

Digi-Key Electronics

612-ZF5S-05-03-T-WT-ND

0

70

$1.84

Copyright © 2021 WTWH Media LLC and its licensors. All rights reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy

ZF5S-05-03-T-WT

Samtec

Distributor

Distributor

SKU

Stock

Price Range

AVNET

ZF5S-05-03-T-WT

None

1

$1.99

50

$1.62

100

$1.37

500

$1.22

Sager Electronics

000000000003543356

0

1

$1.99

50

$1.62

Digi-Key Electronics

612-ZF5S-05-03-T-WT-ND

0

70

$1.84

Copyright © 2021 WTWH Media LLC and its licensors. All rights reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.Privacy Policy

Copyright © 2021 WTWH Media LLC and its licensors. All rights reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy