electronics module VMPA2-FB-EMS-D2-4 Diagnosis=(* Condition Monitoring, * Wire break per valve coil, * Short circuit of valves, * Undervoltage, valves), Max. number of valve positions=2, Max. number of solenoid coils=4, Intrinsic current consumption at load voltage=3 mA, Intrinsic current consumption at operating voltage=8 mA

regulator plate VMPA2-B8-R2C2-C-10 Width=21 mm, Assembly position=Any, Pneumatic vertical stacking=Pressure regulator for 2, Controller function=(* Output pressure constant, * with secondary exhaust), Pressure gauge selection=possible

multi-pin node VABE-S6-1LF-C-M1-R19 For valve terminals VTSA and VTSA-F. Assembly position=Any, Max. number of valve positions=(* 16 with monostable valves, * 8 with bistable valves), Nominal operating voltage DC=24 V, Permissible voltage fluctuation=+/- 10 %, Corrosion resistance classification CRC=0 - No corrosion stress

coupling EAMC-30-32-6.35-8 Holder diameter 1=6,35 mm, Holder diameter 2=8 mm, Size=30, Nominal length=32 mm, Assembly position=Any

coupling EAMC-30-32-8-8 Holder diameter 1=8 mm, Holder diameter 2=8 mm, Size=30, Nominal length=32 mm, Assembly position=Any

manifold block CPE14-PRS-3/8-5 For CPE valves. Grid dimension=20 mm, Assembly position=Any, Max. number of valve positions=5, Max. no. of pressure zones=2, Operating pressure=-0,9 - 10 bar

manifold block CPE18-PRS-3/8-3 For CPE valves. Grid dimension=26 mm, Assembly position=Any, Max. number of valve positions=3, Max. no. of pressure zones=2, Operating pressure=-0,9 - 10 bar

proximity sensor SME-8M-DS-24V-K-0,3-M8D Electric, with reed contact, for drives with T-slot, assembly from above, with M8 plug. Authorisation=(* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity)=to EU directive for EMC, Special characteristics=Oil resistant, Materials note=(* Free of copper and PTFE, * Conforms to RoHS), Measuring principle=Reed magnetic

proximity sensor SME-8M-DS-24V-K-7,5-OE Electric, with reed contact, for drives with T-slot, assembly from above, with cable. Authorisation=(* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity)=to EU directive for EMC, Special characteristics=Oil resistant, Materials note=(* Free of copper and PTFE, * Conforms to RoHS), Measuring principle=Reed magnetic

mini slide DGSL-4-30-P1A For position sensing, with highly accurate, durable ball-cage guide and very high repetition accuracy, flexible damping on both sides with metallic end position (P1). Stroke=30 mm, Adjustable endposition range/front length=25,5 mm, Adjustable endposition range/rear length=13,5 mm, Piston diameter=6 mm, Operating mode of drive unit=Yoke

Gecko DIL Male Vertical Surface Mount Connector, no latches, gold, pick & place (cut tape packing), 17+17 contacts

2.00mm (0.079") Pitch DIL Vertical 3.5mm Throughboard Pin Header, 3.5mm mating pin height, gold, 20+20 contacts

2.00mm (0.079") Pitch DIL Vertical SMT Socket Assembly, selective gold + tin, 3+3 contacts

2.00mm (0.079") Pitch SIL Horizontal SMT Socket Assembly, selective gold + tin, 3 contacts (Tape & Reel packing)

2.00mm (0.079") Pitch DIL Vertical 2.6mm Throughboard Socket Assembly, selective gold + tin, 3+3 contacts

Archer Kontrol (1.27mm pitch) DIL Vertical Socket SMT high performance connector, 13.65mm connector height, in Tape and Reel - 80 contacts (40+40)

Datamate J-Tek DIL Male Vertical 3mm Throughboard Connector, selective gold + tin/lead, with jackscrews + board mount, 10+10 contacts

Datamate L-Tek DIL Male Vertical SMT Connector, latched, selective gold + tin, 2+2 contacts, pick & place cap

Datamate L-Tek DIL Male Vertical SMT Connector, latched, selective gold + tin, 3+3 contacts, pick & place cap

Datamate L-Tek DIL Male Vertical 3mm Throughboard Connector, unlatched, selective gold + tin/lead, 10+10 contacts

DRUCKTRANSMITTER, WALTER PNEUMATIC VALVES (ISO)

Allied Electronics

Festo

Digi-Key Electronics

Farnell

Harwin Plc

Element14

Newark

Mouser Electronics

NAC Semi

Pushbutton Switches TW ILL PB Rnd Extd Mon FV LED

Onlinecomponents.com

Sager Electronics

Most H (Metal Can), J (Ceramic), and K (Metal Can) Packages from Analog Devices Are Obsolete 
The LT138A series of adjustable regulators provide 5A output current over an output voltage range of 1.2V to 32V. The internal voltage reference is trimmed to less than 1%, enabling a very tight output voltage. In addition to excellent line and load regulation, with full overload protection, the LT138A incorporates new current limiting circuitry allowing large transient load currents to be handled for short periods. Transient load currents of up to 12A can be supplied without limiting, eliminating the need for a large output capacitor.
The LT138A is an improved version of the popular LM138 with improved circuit design and advanced process techniques to provide superior performance and reliability.
The graph below shows the significant improvement in output voltage tolerance achieved by using the LT138A or LT338A.
Applications

    High Power Linear Regulator
    Battery Chargers
    Power Driver
    Constant-Current Regulator

ALW2B9910D-G-24V-ENGRAVED

IDEC Corporation

Distributor

Distributor

SKU

Stock

Price Range

Mouser Electronics

199-ALW2B9910DG24VEN

0

1

$42.01

5

$38.77

10

$35.76

25

$33.38

50

$31.45

100

$30.50

250

$29.59

500

$28.00

1000

$26.93

Onlinecomponents.com