Electromechanical Relay 48VDC 2.6KOhm 2A 4PDT (21.82x28.17)mm Socket General Purpose Relay

Signal Relay 24VAC 160Ohm 1A 4PDT(21.82x28.17)mm Socket General Purpose Relay

Power Relay 240VAC 12KOhm 5A 4PDT(21.82x28.17)mm Socket General Purpose Relay

Electromechanical Relay 48VDC 1.8KOhm 5A 3PDT(35.71x35.71)mm Socket General Purpose Relay

Electromechanical Relay 3PDT 5A 240VAC 9.11KOhm Plug-In

Electromechanical Relay 240VAC 9.11KOhm 10A DPDT (38.89x35.71x55.55)mm Socket Industrial Relay

Electromechanical Relay 120VAC 2.25KOhm 10A DPDT(73.7x38.89x55.55)mm Bracket Industrial Relay

Electromechanical Relay 110VDC 10KOhm 10A DPDT (( 38.89mm 35.71mm 55.55mm)) Socket Industrial Relay

Power Relay 48VDC 1.8KOhm 10A DPDT(38.89x35.71x55.55)mm Socket Industrial Relay

Display Development Tools 3.2S Kit for Arduino w/2GB SD & Prg Adptr

Onlinecomponents.com

Arrow Americas

Digi-Key Electronics

Mouser Electronics

Verical

Res Thin Film 0402 3.01K Ohm 0.5% 1/16W ±50ppm/°C Molded SMD Paper T/R

AVNET

The HMC1105 is a passive miniature frequency doubler MMIC. Suppression of undesired fundamental and higher order harmonics is up to 46 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, requires no DC bias, and adds no measurable additive phase noise onto the multiplied signal.
Applications

    Point-to-Point and VSAT Radios 
    V-Band Communications 
    Test Instrumentation
    Radar
    Space

The HMC156A devices are miniature frequency doublers that are available in a monolithic microwave integrated circuit (MMIC) die (HMC156A), and a nonhermetic, ceramic surface mount package (HMC156AC8). Suppression of undesired fundamental and higher order harmonics is 38 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers, features small size, and requires no dc bias.
Applications

    Wireless local loop 
    Local multipoint distribution systems (LMDS)
    Very small aperture terminal (VSAT)
    Point-to-point radios 
    Unlicensed National Information Infrastructure (U-NII) and high performance radio LAN (HiperLAN)
    Test equipment

The HMC158 devices are miniature frequency doublers that are available in a monolithic microwave integrated circuit (MMIC) die (HMC158) and a nonhermetic, ceramic surface mount package (HMC158C8). Suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal level. The doublers use the same diode/balun technology used in Hittite MMIC mixers, feature small size, and require no dc bias.
Applications

    Wireless local loop 
    Local multipoint distribution systems (LMDS)
    Very small aperture terminal (VSAT)
    Point-to-point radios 
    Unlicensed National Information Infrastructure (U-NII) and high performance radio LAN (HiperLAN)
    Test equipment

The HMC187AMS8(E) is a miniature frequency doubler MMIC in plastic an 8-lead MSOP package. The suppression of undesired fundamental and higher order harmonics is 40 dB typical with respect to input signal levels. The doubler uses the same diode/ balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal.
Applications

    Wireless Local Loop 
    LMDS, VSAT, and Point-to-Point Radios 
    UNII & HiperLAN 
    Test Equipment

The HMC188MS8(E) is a miniature frequency doubler in plastic 8-lead MSOP package. The suppression of undesired fundamental and higher order harmonics is 45 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal.
Applications

    Wireless Local Loop
    LMDS, VSAT, and Point-to-Point Radios
    UNII & HiperLAN
    Test Equipment

The HMC189AMS8(E) is a miniature passive frequency doubler in a plastic 8-lead MSOP package. The suppression of undesired fundamental and higher order harmonics is 33 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers. The doubler is ideal for high volume applications where frequency doubling of a lower frequency is more economical than directly generating a higher frequency. The passive Schottky diode doubler technology contributes no measurable additive phase noise onto the multiplied signal.
The HMC189AMS8(E) is a replacement for the HMC189MS8(E).
Applications

    Wireless Local Loop 
    LMDS, VSAT, and Point-to-Point Radios 
    UNII & HiperLAN 
    Test Equipment

The HMC205 is a passive miniature frequency doubler in a MMIC die. Suppression of undesired fundamental and higher order harmonics is 32 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, no DC bias, and no measurable additive phase noise onto the multiplied signal.
Applications

    Wireless Local Loop
    LMDS, VSAT, and Point-to-Point Radios
    Test Equipment

The HMC331 is a GaAs MMIC passive miniature frequency doubler MMIC. Suppression of undesired fundamental and higher order harmonics is 50 dB typical with respect to input signal level. The doubler utilizes the same GaAs Schottky diode/balun technology found in Hittite MMIC mixers. It features small size, requires no DC bias, and adds no measurable additive phase noise onto the multiplied signal.
Applications 

    Wireless Local Loop 
    LMDS, VSAT, and Point-to-Point Radios 
    Test Equipment

The HMC916LP3E is an active x3 frequency multiplier in a 3x3 mm leadless QFN surface mount package. Power output is 2 dBm typical from a single +5V supply and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and spurious is 15 dBc typical with respect to output signal level. The low additive SSB phase noise of -152 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC916LP3E is ideal for use in LO multiplier chains allowing reduced parts count versus traditional approaches.
Applications

    Microwave Radio & VSAT
    Military Radios, Radar & ECM
    Test Instrumentation

LDO Voltage Regulators Undefined Undefined - IC REG LDO 1A 1.2V SOT-223

RT0402DRE073K01L

Yageo Corporation

Suppliers

Supplier

SKU

Stock

Price Range

Digi-Key Electronics

311-2281-1-ND

Digi-Key Electronics

311-2281-2-ND

Digi-Key Electronics

311-2281-6-ND

AVNET